Complete Setup Guide: XAUUSD H1 Breaks DVN Key Trendline – Analysis and Forecast – March 23, 2026

Requirements
Before connecting your EA, make sure your setup meets the following requirements:
- platform: MetaTrader 5 (MT5) — Build 2755 or higher recommended
- Account type: Any (demo, live or prop company)
- broker: ECN or STP with low spreads to XAUUSD. Maximum recommended spread: 25 points
- VPS: We strongly recommend 24/7 operation. Your local PC will work, but must remain online during active sessions.
- Internet connection: A stable connection is required. The news filter uses the MQL5 economic calendar, which requires linking.
- Minimum balance: No hard minimums — scales to any account size with risk % lot mode
installation
Step 1 – Download the EA file
After purchase, go to your MQL5 account → my product Download the .ex5 file.
Step 2 – Open the MT5 Data Folder
MT5: Go to next File → Open Data Folder. Go to MQL5 → Experts. Copy the .ex5 file to this folder.
Step 3 – Restart MT5 or refresh the navigator.
In the MT5 Navigator panel (left) expert advice and choose refresh. What to see now DVN breaks through key trend line It’s on the list.
Step 4 – Open XAUUSD H1 Chart
Right-click on Market Watch. HAUUSD and choose chart window. Switch the chart period to: H1.
Step 5 – Connect EA to Chart
Drag EA from the navigator onto the XAUUSD H1 chart. The Settings window will automatically open.
Step 6 – Enable Auto Trading
In the EA Settings window:
- OK ✅ Allow automatic trading
click great.
Step 7 – Make sure the EA is running
A smiley face icon (🙂) appears in the top right corner of the chart. The control panel appears to the left of the chart. If you see a frowning face (🙁), automated trading is not activated. automatic trading Button on the MT5 toolbar.
Recommended Settings for XAUUSD H1
This is the tested default setting. You can load directly from the settings file provided by the support group.
Breakouts and Trading
| parameter | Recommended value | memo |
|---|---|---|
| period | H1 | Match chart period |
| Breakout type | candle | More responsive. Use Close for fewer but stronger signals. |
| trading mode | buy and sell | In a strong uptrend, only buy, but in a downtrend, switch to sell. |
Premises and Risks
| parameter | Recommended value | memo |
|---|---|---|
| lot mode | danger % | Automatically scales to account size. |
| risk ratio | 1.0% | Increase to 1.5-2% for more aggressive growth |
| fixed lot | 0.01 | Only used when Lot Mode = Fixed. |
Stop Loss and Take Profit
| parameter | Recommended value | memo |
|---|---|---|
| SL mode | swing point | Place the SL at the highest/lowest swing point. It’s more logical than fixed. |
| SL points | 3500 | Fallback only if swing point is not available |
| TP points | 4500 | Adjust based on backtesting results. |
ATR trailing stop
| parameter | Recommended value | memo |
|---|---|---|
| ATR trailing activation | truth | Recommended — Protect your profits from strong moves |
| ATR period | 14 | standard settings |
| Activate multiplier | 2.0 | Trails become active only after ATR where profits are doubled. |
| trail multiplier | 7.0 | Trail Distance = 7× ATR at current price |
trend filter
| parameter | Recommended value | memo |
|---|---|---|
| Activate trend filter | truth | Blocks countertrend entries based on weekly SMA. |
| SMA period | 5 | We use a 5-period SMA for the W1 period. |
💡 How the trend filter works: If the price is above the weekly SMA → only a buy breakout will occur. If the price is below → only sell breakout is possible. This significantly reduces trading losses in various markets.
prop company mode (optional)
Only enable this feature if you are running a prop company challenge.
| parameter | Yes (FTMO $10,000) | memo |
|---|---|---|
| Enable Prop Firm Mode | truth | — |
| Maximum daily loss | 500 | 5% of $10,000 |
| Maximum total reduction | 1000 | 10% of $10,000 |
| profit target | 1000 | 10% goal |
⚠️ important: Set these values based on your specific challenge rules. EA automatically stops all new transactions when the limit is reached.
news filter (Optional, but recommended)
| parameter | Recommended value |
|---|---|
| Activate news deals filter | truth |
| all time news | 30 |
| minutes after news | 30 |
| High impact only | truth |
| medium impact | truth |
| Automatic call detection | truth |
First run checklist
Before going live, check each of the following:
- The chart is set to: HAUUSDperiod H1
- EA displays a 🙂 (smiley) icon in the corner of the chart.
- The Auto Trading buttons on the toolbar are: green (enabled)
- The control panel is displayed on the chart.
- Lot mode is set to: danger % The risk ratio is set at a comfortable level.
- Trend filters include: activated
- ATR lagging is activated
- If you use Prop Firm mode, make sure your daily drawdown, drawdown and target values match your challenge rules.
- execution Backtest first (Strategy Tester → Visual Mode) Understand how EA works before going live.
problem solving
Problem: EA Show 🙁 (frowning face) Auto-trading has been disabled. Click Next. automatic trading Also check the button on the MT5 toolbar (it should turn green). Allow automatic trading I checked this when attaching the EA.
Problem: No trend lines appear on the chart. EA needs enough bars to detect the swing point. Make sure your H1 chart has at least 200 bars loaded. movement Tools → Options → Chart and increase maximum bar in chart More than 10,000.
Problem: EA does not initiate transactions. Check out the following: (1) Is your trend filter blocking your trade? Take a look at the panel. Current trend bias is displayed. (2) Does Prop Firm mode stop trading due to limits being reached? Check out the Prop Firm section in the panel. (3) Is your transaction being blocked due to a current news event? When the News block is activated, the panel will display “News: (X)”.
Problem: When I change the chart period, the trend line disappears. This is expected behavior. EA draws trend lines only over a set period of time. period Parameters. Switching the chart to a different time period hides the lines. Switch back to H1 and the lines will reappear.
Issue: Journal displays “Not enough bars” warning This usually happens immediately after attaching the EA to a new chart. Wait for MT5 to download historical data or manually scroll back the chart to trigger the data load. The warning will disappear when enough bars are loaded.
Problem: ATR trailing does not move stop loss. Stop tracking is activated only after the transaction reaches the following point: Activate multiplier Profit distance (default: 2× ATR). If a trade has not yet moved far enough in your direction, the trailing stop is in standby mode. This is intentional. This prevents premature stops from tightening due to weak movements.
Get support and set up your files
Please contact us via KakaoTalk after purchase. MQL5 Inbox You will be added to a private support group. Within the group you will find:
- Optimized set files for XAUUSD and other symbols (EURUSD, US30, etc.)
- Configuration files updated regularly as market conditions change
- Direct support from developers
📡 Free Gold Signals and Analysis:
https://t.me/DVN_Core
📩 Contact us directly:
https://t.me/DuyVanNguy
Thank you for your purchase. If your EA is doing well, leaving a review on the product page will help us continue to grow the project.


